Tapware


Smart Command Wall Outlet - Kit


This wall mounted tap features infra-red sensors for touchless activation, removing physical touchpoints for a more hygienic bathroom experience. Configurable to three pre-mixed thermostatic temperatures (Cold/Warm/Hot) the user is guaranteed a consistent experience every time. These pre-set temperatures are displayed via the prominent LED at the end of the spout.

Keep track of handwashing compliance by monitoring the relationship between sanitaryware and tapware activations and durations. Giving you a real time view of the hygiene status of your bathrooms.

Also available with a wall plate or deck (Hob) mounted version.

Product Overview


Product Type Electronic Mixer
WELS star rating and flow rate WELS 6 Stars rated, 4.5L/min
Kit Rough In and Spout Trim ordered seperately
Colours and Codes Chrome, Black
Product Codes 98469 = Wall Rough In Kit

98464C6A = Chrome Spout Trim Kit

98464B6A = Black Spout Trim Kit

Hygienic Flush Hygienic flush every 24 hours (optional).
Electronic Valve The operating voltage of the valve is 6 volts DC.
Electronics Supply voltage to the system is 240V AC 50Hz. Operating current 6 volts DC.
Installation Single Temperature, Male DN15 (G1/2″) water connection. For general electrical connection install a plug socket 240V AC.

Product Technical Data


Power Supply: Wall mounted power pack (supplied)

Sensor Type: Infra-Red

Power Consumption: Max. 20mA

Plug Pack Input: 240V AC 50/60 Hz

Plug Pack Output: 6V DC

BMS Connection Type: BMS connection via Caroma Smart Command Bluetooth® Gateway & Concentrator.

Communication Protocol: Bluetooth 4.0

Default IP Address: Configurable or advise at order placement for pre configuration.

Power Supply EMC Approvals: CE, C-Tick and FCC

Power Supply Safety Approvals: RCM, UL, CUL, TUV, GS, SAA, CE and CB

Power Supply Safety Compliance: AS/NZS 60950, UL 60950, EN 60950, IEC 60950

Static Inlet pressure range:150 – 700 kPa

Smart Command Wall Mounted Basin - Kit


This wall mounted tap features infra-red sensors for touchless activation, removing physical touchpoints for a more hygienic bathroom experience. Configurable to three pre-mixed thermostatic temperatures (Cold/Warm/Hot) the user is guaranteed a consistent experience every time. These pre-set temperatures are displayed via the prominent LED at the end of the spout.

Keep track of handwashing compliance by monitoring the relationship between sanitaryware and tapware activations and durations. Giving you a real time view of the hygiene status of your bathrooms.

Plate mounted version is perfect for retro-fit installations where previous wall mounted tapware installations have let holes in tiles.

Also available without wall plate or in a deck (Hob) mounted version.

Product Overview


Product Type Electronic Mixer
WELS star rating and flow rate WELS 6 Stars Rated, 4.5L/min
Colours and Codes 98462C6A = Chrome Kit
Hygienic Flush Hygienic flush every 24 hours (optional).
Electronic Valve The operating voltage of the valve is 6 volts DC.
Electronics Supply voltage to the system is 240V AC 50Hz. Operating current 6 volts DC.
Installation Single Temperature, Male DN15 (G1/2″) water connection. For general electrical connection install a plug socket 240V AC.

Product Technical Data


Ethernet Gateway Dimensions; Width 214mm x Distance to Centre of Outlet: 216mm x Height: 113mm

Weight: 650g

Power Supply: Wall mounted power pack (supplied)

Sensor Type: Infra-Red

Power Consumption: Max. 20mA

Plug Pack Input: 240V AC 50/60 Hz

Plug Pack Output: 6V DC

BMS Connection Type: BMS connection via Caroma Smart Command Bluetooth® Gateway (410100) & Concentrator (4110101)

Communication Protocol: Bluetooth 4.0

Power Supply: EMC Approvals CE, C-Tick and FCC

Power Supply Safety Approvals: RCM, UL, CUL, TUV, GS, SAA, CE and CB Power Supply Safety Compliance: AS/NZS 60950, UL 60950, EN 60950, IEC 60950

Smart Command Hob Mounted Basin - Kit


This hob mounted tap features infra-red sensors for touchless activation, removing physical touchpoints for a more hygienic bathroom experience. Configurable to three pre-mixed thermostatic temperatures (Cold/Warm/Hot) the user is guaranteed a consistent experience every time. These pre-set temperatures are displayed via the prominent LED at the end of the spout.

Keep track of handwashing compliance by monitoring the relationship between sanitaryware and tapware activations and durations. Giving you a real time view of the hygiene status of your bathrooms.

Also available without wall plate or in a deck (Hob) mounted version.

Product Overview


Product Type Electronic Mixer
WELS star rating and flow rate WELS 6 Stars Rated, 4.5L/min
Colours and Codes 98461C6A = Chrome Kit
Hygienic Flush Hygienic flush every 24 hours (optional).
Electronic Valve The operating voltage of the valve is 6 volts DC.
Electronics Supply voltage to the system is 240V AC 50Hz. Operating current 6 volts DC.
Installation Single Temperature, Male DN15 (G1/2″) water connection. For general electrical connection install a plug socket 240V AC.

Product Technical Data


Dimensions: Height: 211mm x Distance to Centre of Outlet: 236mm x Width: 50mm

Weight: 650g

Power Supply: Wall mounted power pack (supplied)

Sensor Type: Infra-Red

Power Consumption: Max. 20mA

Plug Pack Input: 240V AC 50/60 Hz

Plug Pack Output: 6V DC

BMS Connection Type: BMS connection via Caroma Smart Command Bluetooth® Gateway (410100) & Concentrator (4110101)

Communication Protocol: Bluetooth 4.0 Default IP Address Configurable or advise at order placement for preconfiguration

Power Supply EMC Approvals: CE, C-Tick and FCC

Power Supply Safety Approvals: RCM, UL, CUL, TUV, GS, SAA, CE and CB

Power Supply Safety Compliance: AS/NZS 60950, UL 60950, EN 60950, IEC 60950

Smart Command Wall Mounted Blended Basin Mixer


This wall mounted tap features infra-red sensors for touchless activation, removing physical touchpoints for a more hygienic bathroom experience. Precise delivery of pre-mixed temperatures which can be displayed via the prominent LED at the end of the spout. Configurable to 3 colours to represent Cold, Warm or Hot.

Keep track of handwashing compliance by monitoring the relationship between sanitaryware and tapware activations and durations. Giving you a real time view of the hygiene status of your bathrooms.

Available in a number of colours & also available in a Hob mounted version.

Stock available October 2021

Product Overview


Product Type Electronic Mixer
WELS star rating and flow rate WELS 6 Stars rated, 4.5L/min
Kit Rough In and Spout Trim ordered seperately
Colours and Codes 98469 = Wall Rough In Kit

98492C6A = Chrome Spout Trim

98492BB6A = Brushed Brass Spout Trim

98492BN6A = Brushed Nickle Spout Trim

98492GM6A = Brushed Gun Metal Spout Trim

98492B6A = Black Spout Trim

Hygienic Flush Hygienic flush every 24 hours (optional).
Electronic Valve The operating voltage of the valve is 6 volts DC.
Electronics Supply voltage to the system is 240V AC 50Hz. Operating current 6 volts DC.
Installation Single Temperature, Male DN15 (G1/2″) water connection. For general electrical connection install a plug socket 240V AC.

Product Technical Data


Power Supply: Wall mounted power pack (supplied)

Sensor Type: Infra-Red

Power Consumption: Max. 20mA

Plug Pack Input: 240V AC 50/60 Hz

Plug Pack Output: 6V DC

BMS Connection Type: BMS connection via Caroma Smart Command Bluetooth® Gateway & Concentrator.

Communication Protocol: Bluetooth 4.0

Default IP Address: Configurable or advise at order placement for pre configuration.

Power Supply EMC Approvals: CE, C-Tick and FCC

Power Supply Safety Approvals: RCM, UL, CUL, TUV, GS, SAA, CE and CB

Power Supply Safety Compliance: AS/NZS 60950, UL 60950, EN 60950, IEC 60950

Static Inlet pressure range:150 – 700 kPa

Smart Command Hob Mounted Blended Basin Mixer


This hob mounted tap features infra-red sensors for touchless activation, removing physical touchpoints for a more hygienic bathroom experience. Precise delivery of pre-mixed temperatures which can be displayed via the prominent LED at the end of the spout. Configurable to 3 colours to represent Cold, Warm or Hot.

Keep track of handwashing compliance by monitoring the relationship between sanitaryware and tapware activations and durations. Giving you a real time view of the hygiene status of your bathrooms.

Available in a number of colours & also available in a wall mounted version.

Stock available October 2021

Product Overview


Product Type Electronic Mixer
WELS star rating and flow rate WELS 6 Stars Rated, 4.5L/min
Colours and Codes 98489C6A = Chrome
98489BB6A = Brushed Brass
98489BN6A = Brushed Nickle
98489GM6A = Brushed Gun Metal
98489B6A = Black
Hygienic Flush Hygienic flush every 24 hours (optional).
Electronic Valve The operating voltage of the valve is 6 volts DC.
Electronics Supply voltage to the system is 240V AC 50Hz. Operating current 6 volts DC.
Installation Single Temperature, Male DN15 (G1/2″) water connection. For general electrical connection install a plug socket 240V AC.

Product Technical Data


Dimensions: Height: 211mm x Distance to Centre of Outlet: 236mm x Width: 50mm

Weight: 650g

Power Supply: Wall mounted power pack (supplied)

Sensor Type: Infra-Red

Power Consumption: Max. 20mA

Plug Pack Input: 240V AC 50/60 Hz

Plug Pack Output: 6V DC

BMS Connection Type: BMS connection via Caroma Smart Command Bluetooth® Gateway (410100) & Concentrator (4110101)

Communication Protocol: Bluetooth 4.0 Default IP Address Configurable or advise at order placement for preconfiguration

Power Supply EMC Approvals: CE, C-Tick and FCC

Power Supply Safety Approvals: RCM, UL, CUL, TUV, GS, SAA, CE and CB

Power Supply Safety Compliance: AS/NZS 60950, UL 60950, EN 60950, IEC 60950